Forecourt Washer

Designed for Garage Forecourts,and Fleet Washing, either to raise revenue or for the convenience of the staff.

Mounted in a free standing, frost protected, stainless steel cabinet, bolted to the ground, and fitted with a locking door which prevents theft and unauthorised tampering. Machine settings and the detergents are all secured inside the locked cabinet.

This is a fully programmed machine which can be operated by tokens, buttons, or coded keypad with up to three preset timed programmes
(see below):

  • The system initially supplies a cold water high pressure rinse for washing away dirt and mud
  • Then a hot water chemical mix, which actively dissolves dirt and grease
  • Then a high pressure rinse to clean off the grease and chemical
  • Followed by a wax rinse (optional)
  • All times can be preset to suit the customers application to ensure an effective and rapid wash

The preset timed programmes typically operate as follows:-

High Pressure Pre-Rinse (Typically 2.5 mins.)
* Buzzer Sounds

Hot Detergent Application (Typically 1.5 mins.)
* Buzzer Sounds

High Pressure Wash (Typically 3 mins.)
* Buzzer Sounds

Wax Rinse Application (Typically 1 mins.)
* Buzzer Sounds

Technical Specifications:

Model Power Flow Voltage Motor
1500SVW 1450 psi./100 bar 13 lpm. 240v single phase 2.2KW
2200SVW 2200 psi./150 bar 14 lpm. 415v three phase 4.0KW

Dimensions:

Length Width Height Weight
600 mm 900 mm 1250 mm 140 kg.

Supplied with:

  • Hand gun with 900 mm insulated lance and handgun with 1500mm lance and brush
  • 2 x 9 meters / 30 feet of high pressure hose fitted with quick release connections
  • Lance holders on cabinet
  • Detergent injection system
  • Token operation with timer (single programme), with buzzers to indicate programme change
  • High pressure rinse lance and a long brush lance for applying chemicals
  • The system has Autostop which switches the machine off after 2 minutes if left unused

Optional Equipment:

Overhead booms. Keypad operation. Multiple token operation (up to 3 preset programmes) or “Buy Time” which lets the operator use the machine in any mode for a set amount of time.